Contact lens should only be won following a prescription from your doctor. This also applies even if the purpose of wearing them is other than for visual correction. During eye examination, the optician will access your eyes health, myopia, hyperopia and astigmatism. Your visual acuity has to get assessed too before Sacramento contact lenses are prescribed.
In the process of their insertion, the first step should always be washing of hands. They should be adequately dried after that. Then, with your dominant hand, hold the tip of the lens with your index finger and bring down the lower eyelid.
The index finger of the other hand is used to elevate the eyelid at the top. While gazing upwards, the lens is placed on the white eye region and the lids released by removal of index fingers. Closing the eyes for a brief period allows lens to be positioned well inside the eye.
In removal, hand washing precedes. They should be dried well before the process is begun. You should first look up and then pull down the posterior eyelid using the middle finger of the principal hand. The pointer finger is utilized to grasp the lens and after squeezing lens between it and the thumb, removal of the contact lens is done carefully. The eye is a very sensitive organ and the lens is a very delicate device. So, a lot of caution should be taken during the process.
The disposable ones are thrown away after a single use. Using them eliminates the need for constant cleaning and storage. However, these processes are not as hard as they are made to sound. As long as you follow the instructions given by the optician, everything will just go smoothly. There are specially made solutions for rinsing, disinfecting, protein removal and conditioning the lenses.
To avoid discomforts and maintain eye health during the use of these lens, there are some procedures to be done. The first one is cleaning the lenses and this should be done by putting a cleanser solution drop on each of the lenses side and rubbing gently for twenty second. This is followed by rinsing which should last for five seconds.
After cleaning and rinsing follows soaking. This must be done using a fresh cleaning solution. Never make the mistake of reusing the solution. The soaking should last for four hours. Thereafter, the lenses are fine to be worn. In case of any lingering debris, they must be cleared away before insertion.
They should be put into a closed case meant for storing lenses if they are not in use. Saline solution should not be used for soaking them. Only the commercially made solutions designed for this purpose are to be used. The saline is not effective in disinfection process. They can remain in the case for up to thirty days if not in use. After this duration, they should be taken out for cleaning and disinfection even if they will not be used immediately. Another important thing you should observe is monthly replacement of the lens case.
In the process of their insertion, the first step should always be washing of hands. They should be adequately dried after that. Then, with your dominant hand, hold the tip of the lens with your index finger and bring down the lower eyelid.
The index finger of the other hand is used to elevate the eyelid at the top. While gazing upwards, the lens is placed on the white eye region and the lids released by removal of index fingers. Closing the eyes for a brief period allows lens to be positioned well inside the eye.
In removal, hand washing precedes. They should be dried well before the process is begun. You should first look up and then pull down the posterior eyelid using the middle finger of the principal hand. The pointer finger is utilized to grasp the lens and after squeezing lens between it and the thumb, removal of the contact lens is done carefully. The eye is a very sensitive organ and the lens is a very delicate device. So, a lot of caution should be taken during the process.
The disposable ones are thrown away after a single use. Using them eliminates the need for constant cleaning and storage. However, these processes are not as hard as they are made to sound. As long as you follow the instructions given by the optician, everything will just go smoothly. There are specially made solutions for rinsing, disinfecting, protein removal and conditioning the lenses.
To avoid discomforts and maintain eye health during the use of these lens, there are some procedures to be done. The first one is cleaning the lenses and this should be done by putting a cleanser solution drop on each of the lenses side and rubbing gently for twenty second. This is followed by rinsing which should last for five seconds.
After cleaning and rinsing follows soaking. This must be done using a fresh cleaning solution. Never make the mistake of reusing the solution. The soaking should last for four hours. Thereafter, the lenses are fine to be worn. In case of any lingering debris, they must be cleared away before insertion.
They should be put into a closed case meant for storing lenses if they are not in use. Saline solution should not be used for soaking them. Only the commercially made solutions designed for this purpose are to be used. The saline is not effective in disinfection process. They can remain in the case for up to thirty days if not in use. After this duration, they should be taken out for cleaning and disinfection even if they will not be used immediately. Another important thing you should observe is monthly replacement of the lens case.
About the Author:
Our website offers Sacramento contact lenses at cheaper prices. To choose us as your selected supplier, review our main homepage right here on http://adairoptometry.com.
No comments:
Post a Comment